This article explains how to restore a device to normal operating state if display is flashing on and off at boot time.
The proceedure is to press reset button as the unit powers up. You use the LED indicator on the back near the Auxilary port as shown below to know when to press reset.
With the reader already powered down
- Plug in POE
- When LED Flashes Green, let it flash about 5 times
- Press the reset button and hold until LED goes solid red
- Allow the unit to fully boot up
If this does not fix it, please send email to [email protected] with MAC Address of unit. See following for process for how to return failed units.